01 January 0001
It’s a high-power contrast of unexpected colors and free-flowing shapes with symmetrical lines and steady gun work. “To me, tape shading is an old lowrider or hot rod type of effect,” says Mitch Lanzini, owner of Lanzini Body Works. “I picture Larry Watson or Barris using this technique in the ‘50s or ‘60s.”
Mitch also says this technique is ideal for beginning painters looking to build confidence. “It’s so, so easy, doesn’t take much time and the effect is cool.” He also believes his paint of choice, the Envirobase® High Performance waterborne basecoat system, is ideal for this effect. “That’s the thing with this paint, it shades so nicely. It’s great for shadows and blends.”
Watch the video below to see Mitch's process, or download the step by step process tutorial for reference when practicing this tape shading technique.
To create a base for the color to pop against, Mitch sprays a coat of White (T400) and then a coat of White Pearl (T453) with Tinted Clear Additive (T490) (1:9 ratio). Once dry, he masks his design. The irregular shapes feel like puzzle pieces, creating a ‘60s vibe.
To delineate the tape shade sections, Mitch masks a gutter in the design. This will create a wide, white stripe between the colors for extra pop.
Mitch lays out the bars using 1.5-inch tape, which gives plenty of room for shadowing. “For a sharper edge, I overlapped the tape about an eighth of an inch to avoid any bleed.”
Mitch uses a SATA 4400B Mini Jet with 1.2 air cap at 20 psi for spraying the tape shades. The color is Violet (T443) with Tinted Clear Additive (T490) (1:9 ratio).
After shading a line, Mitch removes a row of tape and shoots the next. A steady, even spray is vital for a consistent pattern.
Mitch uses the same process for the next section, painted in Green (T430) with Tinted Clear Additive (T490) (1:9 ratio).
Notice that these stripes are perpendicular to the purple and green stripes and adds some nice directional contrast. The color is Yellow (T429) with Tinted Clear Additive (T490) (1:9 ratio).
Mitch finishes the project by clearing it with One Visit® Appearance Clearcoat (EC750). “I love the EC750. It’s really fast. Bam! Bam! You’re done.”
Pete "Hot Dog" Finlan teaches his process for creating "Moving Checkers", a trick he perfected while painting surfboards early in his career.
Low gloss finishes have grown in popularity among refinishers and OEM designers. In this video, painters get tips on how to achieve a great low gloss finish.
Learn how to perform a proper repair on some of today’s highly chromatic, translucent colors and finishes.